Set bestehend aus:
QSC K Sub
The QSC K Series is quite simply The New Standard in lightweight powered loud
speaker systems. For starters, each of the four models features an all new, Pat Quilter designed 1000 watt QSC Class D power module. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.
Extensive
DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.
Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.
Combo
XLR and 1/4" TRS inputs accept both Mic and Line
Level input while a set of
RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.
On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel
LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.
Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.
The K Series fullrange models feature a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).
The KSub is a dual-12" bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included).
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Features:
- DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones
- Tour-grade 18 gauge steel grilles
- GuardRail protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping
- Ergonomic handles with comfortable, non-slip grip
- Attractive and professional appearance
- Rugged ABS enclosures (K8, K10 and K12)
- K10 and K12 perform as main PA or stage monitors
- M10 rigging points for suspended installation (fullrange models)
- Extensive DSP enhances system performance
- DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies
- Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field
- 35 mm pole sockets with Tilt-Direct (fullrange models)
- 1000 watt Class D power modules in all models
- Lightweight portable powered speakers with legendary QSC amplifier power and reliability
Specifications:
- Weight (Net): 74 lb / 33.6 kg
- Input Impedance (ohms): XLR / ¼": 40k balanced / 20k unbalanced
- Transducer Protection: Thermal limiting, excursion limiting
- Cooling: On demand, 50 mm variable speed fan
- Power Output: 1000 W Class D
- Indicators: Power, Signal, Standby, Limit
- AC Power Consumption (1/8 Power): 100 VAC, 2.3 A; 120 VAC, 2.01 A; 230 VAC, 1.13 A
- Low-frequency Transducers: 2 x 12" cone transducers
- Material: Painted birch plywood
- Controls: Power, Gain, LF Mode (Normal/DEEP), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
- Connectors: Dual balanced female XLR/1/4" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
- AC Power Input: Universal power supply 85 - 265 VAC, 50 - 60 Hz
- Maximum SPL (1 meter): 130 dB peak
- Frequency Range (-10 dB): 44 Hz - 148 Hz
- Dimensions: 26" x 14" x 28.1" (including casters) (665 mm x 356 mm x 714 mm)
- Finish: Black textured paint
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
- Frequency Response (-6 dB): 48 Hz - 134 Hz
- Configuration: 4th Order Bandpass
QSC K 10
The QSC K Series is quite simply The New Standard in lightweight powered loud
speaker systems. For starters, each of the four models features an all new, Pat Quilter designed 1000 watt QSC Class D power module. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.
Extensive
DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.
Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.
Combo
XLR and 1/4" TRS inputs accept both Mic and Line
Level input while a set of
RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.
On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel
LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.
Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.
The K Series fullrange models feature a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).
The KSub is a dual-12" bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included).
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Features:
- GuardRail protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping
- Rugged ABS enclosures (K8, K10 and K12)
- 35 mm pole sockets with Tilt-Direct (fullrange models)
- K10 and K12 perform as main PA or stage monitors
- 1000 watt Class D power modules in all models
- DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies
- Tour-grade 18 gauge steel grilles
- M10 rigging points for suspended installation (fullrange models)
- Lightweight portable powered speakers with legendary QSC amplifier power and reliability
- Extensive DSP enhances system performance
- Ergonomic handles with comfortable, non-slip grip
- Attractive and professional appearance
- Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field
- DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones
Specifications:
- Cooling: On demand, 50 mm variable speed fan
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 85 - 265 VAC, 50 - 60 Hz
- Frequency Range (-10 dB): 56 Hz - 20 kHz
- Maximum SPL (1 meter): 129 dB peak
- Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
- Weight (Net): 32 lb / 14.5 kg
- Finish: Black paint
- Power Output: 1000 W Class D
- High-frequency Transducers: 1.75" diaphragm compression driver
- Frequency Response (-6 dB): 60 Hz - 18 kHz
- Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
- Material: Impact resistant ABS
- Input Impedance (ohms): XLR / 1/4": 40k balanced / 20k unbalanced; XLR / 1/4" MIC mode: 2260 balanced; RCA: 10k
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
- Low-frequency Transducers: 10" cone transducer
- Configuration: Multipurpose 2-way
- Dimensions: 20.4" x 12.6" x 11.8" (519 mm x 320 mm x 300 mm)
- Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
- Nominal Coverage (-6 dB): 90° conical
- Grille: Black powder coated 18 gauge steel
- AC Power Consumption (1/8 Power): 100 VAC, 2.3 A; 120 VAC, 2.01 A; 230 VAC, 1.13 A
passendes Zubehör für QSC K-Serie Bundle:
| Multicores y Bafles de escena | Mesas de Mezcla a 24 canales | Dispositivos lumínicos y Juegos | DJ CD Player doppelt zweifach |
Ein Gerät zur Verstärkung und Weitergabe eines eingehenden elektrischen (Ton-)Signals nennt man Verstärker oder Amplifier, kurz Amp.
Jedes Gerät mit einen Audioeingang hat einen bestimmten Maximalwert an verarbeitbarer Signallautstärke. Wird dieser Wert überschritten, kommt es zur sogenannten Übersteuerung. Gewollt oder ungewollt wird der Pegel des Signals in diesen Momenten beschnitten (Clipping), was zu erwünschten und unerwünschten Tonveränderungen führt.
Ein Lautsprecher ist das Endstück einer Tonanlage, ein Baustück der Akustik. Aus ihm kommt der Schall, der zuvor aus elektrischen Signalen umgewandelt wurde. Es gibt sie in verschiedenen Größen, die meist in Zoll angegeben werden. Die Entwicklung der Lautsprecher war ein Nebenprodukt der Entwicklung des Telefons. Das schwingende Teil im Lautsprecher heißt Membran. Allerdings ist die Bandbreite verschiedener Lösungen groß. Es gibt elektrodynamische, magnetostatische, elektrostatische, elektromagnetische und ferroelektrische Varianten.
Mit Level bezeichnet man den Pegel der Lautstärke. Ein Levelpoti oder -regler stellt die Lautstärke eines Tons ein. Die Ausgangslautstärke nennt man Masterlevel.
= Digitaler Signalprozessor. Der DSP bearbeitet Audio- und Videosignale und berechnet aufgrund speziell dafür entwickelter Algorithmen u.a. Effekte in Mischpulten oder sitzt auf DSP Karten und macht den digitalen Einsatz von hochwertigen Effekten erst möglich.
LED ist die Abkürzung für Leuchtdiode. Es handelt sich um eine äußerst energiesparsames Leuchtmittel. Es handelt sich um ein elektronisches Halbleiter-Bauelement. LEDs sind unempfindlich gegenüber Erschütterungen und können auch nicht implodieren, da kein Gas als Füllmittel benutzt wird.
Hierbei handelt es sich um eine bestimmte Art von Stecker, der meist an Koaxialkabeln benutzt wird, z.B. für Audio- und Videoübertragungen. Die internationale Bezeichnung lautet RCA jack, auch "phono jack" oder "phono plug" sind in den USA übliche Bezeichnungen. In Europa wird dieser Stecker oft mit "Cinch"-Stecker bezeichnet.
XLR ist ein Industriestandard für elektrische Steckverbindungen. XLR ist die Standardverbindung für Mikrofon- und Lautsprecheranwendungen, da die Qualität und Sicherheit der Übertragung besser ist, als bei Klinken- oder Cinchsteckern. Auch in der Lichttechnik wird XLR benutzt. Für DMX-Lichtsteuerungen wird statt des dreipoligen ein fünfpoliges XLR-Kabel benutzt.
Eine PA ist eine Beschallungsanlage. Verschiedene akustische Quellen werden dem Publikum mittels Lautsprechern zugänglich gemacht. PA bedeutet Public Address, also "Öffentliche Beschallung". Für Veranstaltungen wie Disco-, Live- oder Konzertbeschallungen ist eine PA-Anlage notwendig. Zur PA gehören also Lautsprecher, Verstärker und optional Mischpult und Effektgeräte. PAs werden wegen ihre Größe und Komplexität häufig fest installiert, können aber auch geliehen oder gemietet werden.
Ein Gerät zur Verstärkung und Weitergabe eines eingehenden elektrischen (Ton-)Signals nennt man Verstärker oder Amplifier, kurz Amp.
Jedes Gerät mit einen Audioeingang hat einen bestimmten Maximalwert an verarbeitbarer Signallautstärke. Wird dieser Wert überschritten, kommt es zur sogenannten Übersteuerung. Gewollt oder ungewollt wird der Pegel des Signals in diesen Momenten beschnitten (Clipping), was zu erwünschten und unerwünschten Tonveränderungen führt.
Ein Lautsprecher ist das Endstück einer Tonanlage, ein Baustück der Akustik. Aus ihm kommt der Schall, der zuvor aus elektrischen Signalen umgewandelt wurde. Es gibt sie in verschiedenen Größen, die meist in Zoll angegeben werden. Die Entwicklung der Lautsprecher war ein Nebenprodukt der Entwicklung des Telefons. Das schwingende Teil im Lautsprecher heißt Membran. Allerdings ist die Bandbreite verschiedener Lösungen groß. Es gibt elektrodynamische, magnetostatische, elektrostatische, elektromagnetische und ferroelektrische Varianten.
Mit Level bezeichnet man den Pegel der Lautstärke. Ein Levelpoti oder -regler stellt die Lautstärke eines Tons ein. Die Ausgangslautstärke nennt man Masterlevel.
= Digitaler Signalprozessor. Der DSP bearbeitet Audio- und Videosignale und berechnet aufgrund speziell dafür entwickelter Algorithmen u.a. Effekte in Mischpulten oder sitzt auf DSP Karten und macht den digitalen Einsatz von hochwertigen Effekten erst möglich.
LED ist die Abkürzung für Leuchtdiode. Es handelt sich um eine äußerst energiesparsames Leuchtmittel. Es handelt sich um ein elektronisches Halbleiter-Bauelement. LEDs sind unempfindlich gegenüber Erschütterungen und können auch nicht implodieren, da kein Gas als Füllmittel benutzt wird.
Hierbei handelt es sich um eine bestimmte Art von Stecker, der meist an Koaxialkabeln benutzt wird, z.B. für Audio- und Videoübertragungen. Die internationale Bezeichnung lautet RCA jack, auch "phono jack" oder "phono plug" sind in den USA übliche Bezeichnungen. In Europa wird dieser Stecker oft mit "Cinch"-Stecker bezeichnet.
XLR ist ein Industriestandard für elektrische Steckverbindungen. XLR ist die Standardverbindung für Mikrofon- und Lautsprecheranwendungen, da die Qualität und Sicherheit der Übertragung besser ist, als bei Klinken- oder Cinchsteckern. Auch in der Lichttechnik wird XLR benutzt. Für DMX-Lichtsteuerungen wird statt des dreipoligen ein fünfpoliges XLR-Kabel benutzt.
Eine PA ist eine Beschallungsanlage. Verschiedene akustische Quellen werden dem Publikum mittels Lautsprechern zugänglich gemacht. PA bedeutet Public Address, also "Öffentliche Beschallung". Für Veranstaltungen wie Disco-, Live- oder Konzertbeschallungen ist eine PA-Anlage notwendig. Zur PA gehören also Lautsprecher, Verstärker und optional Mischpult und Effektgeräte. PAs werden wegen ihre Größe und Komplexität häufig fest installiert, können aber auch geliehen oder gemietet werden.